Philips 107T50/00 Service Manual page 4

Ss ce
44 Go to cover page
The OSD Controls
BRIGHTNESS
To adjust your screen's brightness, follow the steps below. Brightness is
the overall intensity of the light coming from the screen. A 50%
brightness is recommended.
1) Press the + button on the monitor. The BRIGHTNESS window
appears.
BRIGHTNESS
2) Press the = or + button to adjust the brightness.
3) When the brightness is adjusted to the tevel desired, stop pressing
the « or * button and after three seconds the BRIGHTNESS window
will disappear with the new adjustment saved.
Smart Help After the BRIGHTNESS window has disappeared, to
continue to the CONTRAST window, follow the steps under CONTRAST.
CONTRAST
To adjust your screen's contrast, follow the steps bellow. Contrast is the
difference between the light and dark areas on the screen. A 100%
contrast is recommended.
1) Press the -. button on the monitor. The CONTRAST window appears.
CONTRAST
2) Press the - or « button to adjust the contrast.
3) When the contrast is adjusted to the level desired, stop pressing the
= Button and after three seconds the CONTRAST window will
disappear with the new adjustment saved.
Smart Help After the CONTRAST window has disappeared, to
continue to the MAIN CONTROLS, follow the steps under LANGUAGE
OSD Adjustments
LANGUAGE
The ON SCREEN DISPLAY shows its settings in one of eight languages
The default is English, but you can select French, Spanish, German,
Italian, Simplity-Chinese, Korea, Brazilian or Portuguese.
1) Press the ™ button on the monitor. The MAIN CONTROLS window
appears. LANGUAGE should be highlighted.
2) Press the ® button again. The LANGUAGE window appears.
MAIN CONTROLS
LANGUAGE
INPUT SIGNAL SELECT
ZOOM
ADJUST HORIZONTAL
{tl ADJUST VERTICAL
ADJUST SHAPE
ADIUST COLOR
iey RESET TO FACTORY SETTINGS
EL TRA CONTROLS
CLOSE MAIN CONTROLS
MOVE SELECTION THEN &:
3) Press the ~ or + button until the desired language is highlighted.
LANGUAGE
Pe
eneuien 2"
ESPAROL
FRANCAIS
DEeuTscH
ITALIANO
roarucues
Sze
@® MOVE SELECTION THEN
@ BACK TO MAIN CONTROLS
4) Press the ® button to confirm your selection and return to MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted...
Sman Help After retuming to MAIN CONTROLS ...
. . . to continue to INPUT SIGNAL SELECTION, press the * button until
INPUT SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5
under INPUT SIGNAL SELECTION.
. ..to exit completely, press the ™ button
OSD Adjustments (Continued)
ZOOM
To adjust the ZOOM follow the steps below.
1) Press the ® button on the monitor. The MAIN CONTROLS window
appears.
2) Press the © button until ZOOM is highlighted.
MAIN CONTROLS
LANGUACE
INPUT GICNAL SELECTION
ADJUST HORTCONTAL
ADIUST YERTICAL
ADJUST GSHAPE
ADIUNGT COLOR
GFT TO FACTORY SETTINGS
ELTRA CONTROLS
¥ CLOSE MAIN CONTROLS
wa MOVE SELECTION THEN
3) Press the § bution. The ZOOM window appears.
"OOM
§ 200m Q P
—S>—_—
@ so ®
@ BACK TO MAIN CONTROLS
4) Press the ~ ot * button to adjust ZOOM.
Smart Help After retuming to MAIN CONTROLS . . .
. .. 10 exit completely, press the ® button
ADJUST HORIZONTAL
MYIN CONEROULS
LANGUaGce
INDUIE GIGNAL GELECTION
oom
2! 303UGT VERTICAL
oe INIUNGT GHAPE
ADENGT COLOR
BESET FO EACTORY SETTINGS
Poth CONTROES
yvochati.d MAEN CONTROLS
wa MOVE SELECTION THEN
4 Go to cover page
ADJUST POSITION should be hignignted.
ADIUNGST HORITCONTFAL
WMS POSITION
4) Press the - or * button to move the image to the left or right.
5) When the position is adjusted, press the © button to retum to MAIN
CONTROLS window, or press the - to highlight ADJUST SIZE.
ADIUGT HORTCONTAL
POSITION
MSs Sze
BACK TO MAIN CONTROLS
6) To adjust the horizontal size, press the - or + button.
7) When the size is adjusted, press the 3% button to return to MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help After retuming to MAIN CONTROLS . ..
...to continue to ADJUST VERTICAL, press the button until ADJUST
VERTICAL is highlighted. Next, start with step 3 under ADJUST
VERTICAL and follow the directions.
... to exit completely, press the ® button
ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on
your screen either up or down. Use this feature if your image does not
appear centered. ADJUST SIZE under ADJUST VERTICAL expands or
controls the image on your screen, pushing it out toward the top or
bottom or pulling it in toward the center.
1) Press the ® button on the monitor. The MAIN CONTROLS window
appears.