Table of Contents
Advertisement
Before applying power
For the U.S.A. and Canada
Important!
Units shipped to the U.S.A. and Canada are designed for operation on
120 volts AC only.
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE THE
AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRE-
VENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240 volts AC
only.
The mains plug must be ramoved from the wall socket priar to any
internal examination.
The wires in this mains lead ara coloured in accordance with the fol
lowing code,
;
| 2 {| 0) > een Pepe ee oa es Ree
oe waa
Neutral
The wires in this mains lead must be connected to the terminals in the
plugs as follows:
Wire colour
Plug terminal marking
BUG oo. cee cpeettereesseereeepemereraerd OF Black
BIOWN wittutsouaassn bh OF Red
1. If a 13-amp plug is used, this must be fitted with a 5-amp fuse.
2. Ifa 3-pin plug with earthing contact is used, no wire must be con-
nected to the E terminal.
Safety precautions
AK, Caution:
Read this page carefully to ensure
safe operation.
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on 240 V AC
only.
Units shipped to Europe are designed for operation on 230 V AC
only.
For other countries
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel,
Refer to the following paragraph for the proper setting of this switch.
AC voltage selection
This unit operates on 110 — 120 or 220 - 240 volts AC. The AC voltage
selector switch Type A or Type B on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before connect-
ing the power cord to your AC outlet, make sure that the setting
position of this switch matches your tine voltage. If not, it must be set
to your voltage in accordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive lina
voltage due to improper setting of the AC voltage selector switch.
AC voltage selector switch
Qe
<i
AC110-
AC220V~ AC240V~
120V~
Type B
_
Type A
AC110-
AC220-
120V~
240V~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNI-
TUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-
ING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.
KM-992 (En)
3
Advertisement
Table of Contents
