Advertisement
7.2.3. AiR outlet FilteR.
Behind the side grilles in the motor head, two special filters are located (fig 28) which ensure the air returned to the environment is as
free as possible from impurities. The filters will require periodic changing, to do so use a coin (or similar) to gently lever off the grilles,
remove the filters and replace with new ones. When refitting the grilles ensure the arrow on the inner part of the grilles points upwards.
We recommended you keep a spare of each filter type.
8.
tRouBleShootinG
Unit does not start.
Dust comes from the motor unit.
Low efficiency.
Filter problems.
Motor speed increases
or motor vibrates.
Foam comes out of the air filter.
Detergent solution spray not
uniform.
conSuMABleS
Part No VMR921 Detergent for Valet Machine . . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
Part No VMR925 Detergent for Valet Machine . . . . . . . . . . . . . . Packs of 4 x 5 Ltr Containers.
Part No VMR922 Defoaming Agent . . . . . . . . . . . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPoRtAnt: No liability is accepted for incorrect use of this product.
WARRAntY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFoRMAtion: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
No current. The power cable, switch,
or motor faulty. Tank may be full of water.
Water pump thermal cut-out has triggered.
Damaged filter, or filter incorrectly fitted.
Container is full. Filter obstructed.
Hose or accessory blocked.
Outlet filter obstructed. Hose or tool blocked.
Container is full. Filter obstructed.
Hose or accessory blocked.
Wrong detergent used, or used on carpet
or fabric previously cleaned with foaming
detergent.
Detergent filter clogged.
Pick up pipe clogged.
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig 28
Remove grilles
and replace filters
Check the plug and fuse. Repair or
replace faulty part. Empty tank if full.
Wait approx. 10 minutes for cut-out to reset
Reposition or replace the filter.
Take care, as warranty may be lost.
Empty container. Clean or replace the
filter (Chapter 7). Unblock hose or accessory.
Check, clean, or replace the filter (chapter 7).
Remove any obstruction from hose.
Empty the container, clean, refit, or replace
filter (Chapter 7). Unblock hose or accessory.
Add Sealey VMR922 Anti-foaming
agent to waste water tank (see 5.1).
Remove filter and clean (see 7.2.1) .
Remove pick up pipe and clean filter (7.1.2).
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VMA913
Issue: 2 - 18/01/10
Advertisement
