Advertisement
7.2.3. AIR OUTLET FILTER.
Behind the side grilles in the motor head are two special filters (fig 27) which ensure the air returned to the environment is as free
as possible from impurities. The filters will require periodic changing. Use a coin, screwdriver or similar tool, to gently lever off
the grilles, remove filters and replace with new ones. When refitting grilles ensure the arrow on the inner part of the grilles points
upwards.
8.
TROUBLESHOOTING
Unit does not start.
Dust comes from the motor unit.
Low efficiency.
Filter problems.
Motor speed increases
or motor vibrates.
Foam comes out of the air filter.
Detergent solution spray not
uniform.
CONSUMABLES
Part No VMR921 Detergent for Valet Machine . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
Part No VMR925 Detergent for Valet Machine . . . . . . . . . . . . . Packs of 4 x 5 Ltr Containers.
Part No VMR922 Defoaming Agent . . . . . . . . . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
We, the sole importers into the UK, declare that the products listed below are in conformity with the following standards and directives.
Auto Valet Model: VMA911 & VMA912
73.23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
No current. The power cable, switch,
or motor faulty. Tank may be full of water.
Water pump thermal cut-out has triggered
Damaged filter, or filter incorrectly fitted.
Container is full. Filter obstructed.
Hose or accessory blocked.
Outlet filter obstructed. Hose or tool blocked.
Container is full. Filter obstructed.
Hose or accessory blocked.
Wrong detergent used, or used on carpet
or fabric previously cleaned with foaming
detergent.
Detergent filter clogged.
Pick up pipe clogged.
Declaration of Conformity
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
fig 27
Remove grilles
and replace filters
Check the plug and fuse. Repair or
replace faulty part. Empty tank if full.
Wait approx. 10 minutes for cut-out to reset
Reposition or replace the filter.
Take care, as warranty may be lost.
Empty container. Clean or replace the
filter (Chapter 7). Unblock hose or accessory.
Check, clean, or replace the filter (chapter 7).
Remove any obstruction from hose.
Empty the container, clean, refit, or replace
filter (Chapter 7). Unblock hose or accessory.
Add Sealey VMR922 Anti-foaming
agent to waste water tank (see 5.1).
Remove filter and clean (Chapter 7) .
Remove pick up pipe/clean filter (Chapter 7).
The construction files for these products are held by the Manufacturer
and may be inspected on request by contacting Jack Sealey Ltd.
01284 757500
01284 703534
5th October 2006
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VMA911 - VAM912 - 4 - 051006
Advertisement
