Specifications - Toro Greensmaster Flex 1018 Operator's Manual

Kickstand (continued)

Specifications

Note:
Specifications and design are subject to change without notice.
Height of cut
Engine speed
Mowing speed
Transport speed
*Traction unit only. Refer to the cutting unit Operator's Manual for the weight of each cutting unit.
Product Overview: Specifications
G404706
Width
Dry weight*
Width of cut
Clip
Model 04850
84 cm (33 inches)
84 kg (185 lb)
46 cm (18 inches)
Refer to your cutting unit Operator's Manual.
Dependent on reel speed and reel-drive-pulley position.
Low idle: 1,900 ± 100 rpm; High idle: 3,450 ± 100 rpm
3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
8.5 km/h (5.3 mph)
Page 4–9
Kickstand—C -U
UTTING NIT
position
Spring pin
Model 04860
91 cm (36 inches)
86 kg (190 lb)
53 cm (21 inches)
S
ERVICE
3460-887 A