Operation; Switching On And Off; Adjusting The Rotational Speed; Maintenance And Cleaning - Parkside PWSA 20-Li F4 Translation Of The Original Instructions

Operation

Switching on and off
Check the attached tool before use to ensure that
all fastening elements are correctly fitted.
NOTE
► Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece.
► If the appliance blocks due to an overload
and switches off, it will restart automatically
as soon as the cause of the blockage is
removed (auto-start function).
Switching on
♦ First, press the ON/OFF switch
so that you can then press it forwards.
Switching off
♦ Let go of the ON/OFF switch
Switching to continuous operation
♦ First, press the ON/OFF switch
so that you can then press it forwards. Then
press the ON/OFF switch
down until it engages.
Switching off continuous operation
♦ Press the ON/OFF switch
downwards and release it.

Adjusting the rotational speed

You can use the adjusting wheel for speed pre-
selection to preselect the rotational speed:
(1 = slower speed, 6 = faster speed).
We recommend you carry out practice tests to
determine the correct speed.
The speed can also be changed during operation.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The battery angle grinder is maintenance-free.
PWSA 20-Li F4
■
■
■
■
■
■
to the right
.
to the right
forwards and

Disposal

Applies only to France
to the rear and
The product, its packaging and the operating
instructions are recyclable. They are subject to an
extended manufacturer responsibility and will be
collected separately.
Do not use any sharp objects for cleaning the
appliance. Never permit liquids to penetrate
inside the appliance. Otherwise the appliance
could be damaged.
Clean the appliance regularly, preferably imme-
diately after completion of the work.
Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
A vacuum cleaner is required for thorough
cleaning of the appliance.
Ventilation openings must never be obstructed.
Remove any sanding dust stuck to the appliance
with a brush.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
WARNING!
► Do not use any accessories not recommended by
PARKSIDE. This can lead to electric shock and fire.
GB │ IE │
13 ■