Regulatory Approvals - US Robotics USR997924B Installation Manual

For current support contact information, go to the following web site: http://www.usr.com

Regulatory Approvals

FCC Declaration of Conformity
U.S. Robotics Corporation
935 National Parkway
Schaumburg, Il 60173
U.S.A.
declares that this product conforms to the FCC's specifications:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not
installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Shielded Cables: Connections between the workstation and peripherals must be made using shielded cables to comply with FCC
radio frequency emission limits. Networking connections can be made using unshielded twisted-pair (UTP) cables.
Radio and Television Interference:
This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance
with the manufacturer's instructions, it may cause interference to radio and television communications. The 24-Port 10/100 Ether-
net Switch, model 7924B, has been tested and found to comply with the limits for a Class B computing device in accordance with
the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a resi-
dential installation.
Caution to the User:
The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
UL Listing/CUL Listing
This information technology equipment is UL-Listed and CUL-Listed for the uses described in this Installation Guide.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CE Declaration of Conformity
We, U.S. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 60173-5157, USA, declare under our sole responsi-
bility that the U.S. Robotics 24-Port 10/100 Ethernet Switch, model 7924B, to which this declaration relates is in conformity with
the following standards and/or other normative documents:
EN60950
EN55022
EN55024
EN61000-3-2
EN61000-3-3
We hereby declare that this product is in compliance to all the essential requirements of Directive 1999/5/EC. The conformity
assessment procedure referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC has been followed.
Warning: This is a Class A product. In a domestic (home) environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Manufacturer's Disclaimer Statement
The information in this document is subject to change without notice and does not represent a commitment on the part of the ven-
dor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy, or fitness for any
particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or
the products associated with it at any time without obligation to notify any person or organization of such changes. In no event
6