Steaming Tips - Sunbeam 32610078 Owner's Manual

9. Wait until Steamer has cooled and empty water reservoir.
Note: Always unplug the Steamer when not in use.
• Improper use of the Steamer can cause property damage due to the
steam. Always read the instructions in this manual before using your
Steamer.
• Do not operate the Steamer with an empty water reservoir. To add water
during operation, turn steamer off, wait for it to cool down then remove
water reservoir and refill.
• Always read the fabric care labels to help determine fabric type to be
steamed. If unsure of fabric's fiber, test a small hidden area, such as an
inside seam or hem, before steaming.
• For more difficult wrinkles, try steaming from the underside of the fabric.
• When steaming, touching fabric lightly with the steam nozzle can help in
wrinkle removal. It is important to make contact with the garment and/or
fabric.
• Heavier fabrics require more steam.
• Only use water in the unit. Do not add cleaning solutions, scented
perfumes, oils or any other chemicals to the water that can cause damage
to the appliance.
• Do not use steam directly against wall or doors.
• When hanging garment on a door while steaming, be careful not to
damage the door with steam.
• After use, empty water reservoir by turning it upside down to ensure all
water empties out and avoid leaks.
• When steaming, move the steamer continuously over the item being
pressed. Do not keep steamer over an area for any period of time to
avoid damage to the fabric.

STEAMING TIPS

6