Table of Contents
Advertisement
The button does
not work.
The Velocity of
the Note On does
not increase
(decrease) even if
hitting the Pad
strongly (softly).
@
Others
Problem
This product is not
recognized on the
smart device even
though the product
and smart device
are connected via
USB.
@
@
The Panel Lock function is
enabled.
The setting of the current
Trigger does not match
how hard the Pad is being
hit.
Cause
Some smart devices might
misidentify themselves as the
host (discharge side) and
automatically disconnect.
Disable the Panel Lock function as described
on
this
page.
Select another Trigger by following the
instructions on this page. Otherwise, try
changing the following values.
• "
42
Trigger Note Velocity Fixed
and "
43
Trigger Note Velocity
each Pad
• "
44
Trigger Note Velocity
"
45
Trigger Note Velocity
each Pad
"
40
Trigger A/D
Gain" for each Pad
Solution
Unplug the cable and plug it back in. For
details about the USB connection
between this product and the smart
device/computer, see
FGDP-30 User Guide
Value"
Curve" for
Minimum" and
Maximum" for
this
page.
© 2023 Yamaha Corporation
Published 09/2023
YJ-A0
62
Advertisement
Table of Contents
