Table of Contents
Advertisement
58
Utility USB
Audio Output
Gain
@
Audio Loopback
By setting " 57
Utility USB Audio
such as a computer and smart device to the [USB TO HOST] terminal, an Audio Loopback
(audio sent from the external device to this product and then returned to the computer) is
configured. As a result, the music of the external device and the performance of this
product can be mixed and recorded in music software like a DAW on the external device.
Loop connection
Noise might occur when a single computer/smart device is connected to both the [AUX IN]
jack and [USB TO HOST] terminal (which is referred to as "loop connection"). In this case,
try the following.
Remove the cable from the [AUX IN] jack, and use only the USB cable for audio
communication.
If a USB cable is connected for charging, change the connection destination from a
computer/smart device to another power source such as a USB adaptor.
[59 62] Other settings
No.
Item name
(Voice
Guide)
59
Utility Pad
Layout
60
Utility
Audition
Velocity
Determines the amount of volume
amplification when outputting audio to an
external device connected via USB. A positive
value increases the volume while a negative
value decreases the volume.
Loopback" to "On" and connecting an external device
Description
Inverts the
Pad numbers
right sides of the product. "Left" is for playing with
your left hand while "Right" is for playing with your
right hand.
Determines the Velocity of the audition sound that
is played back when the Pad sound (Voice) is
changed in Menu 23 or Menu 24.
between the left and
−18, −12,
0 dB
−6, 0, +6,
+12, +18
Range
Default
Value
Left, Right
Right
Off, 1 127
100
FGDP-30 User Guide
50
Advertisement
Table of Contents
