5. Remove existing bottom hinge (3 screws) and remount on oppo-
site side TOP . Remove top hinge screw pin.
6. With bottom of door facing up, remove pivot plate (2 screws), flip
over, and remount on opposite side of door (see Figure 10).
7. Holding door upright with top of
door tilted forward, place hole of
door pivot plate on bottom hinge
screw pin (see Figure 11).
8. Tilt top of door into position in top
hinge and install top hinge screw
pin.
9. Install
plastic
removed in Step 2 in existing hinge
holes (3 each, top and bottom).
Figure 10
screw
plugs
15
UL319
UL312A
Figure 11