Advertisement
:niMmi.M.ltAllni}|MiiHnmi|
^asic PlaybaclT)
V_---^
Prepare the power supply.
1. Open the cover of the DVD player by hand.
Slide the POWER switch to the left to turn
the unit on.
The GOBY Logo picture appears on screen after
2-3 seconds turning on the unit.
2. Load a disc
Press OPEN
(
3
)
button to open the disc lid and insert
a disc with the label up.
power switch
Close the disc lid by hand.
• If the single sided disc is placed in upside down, "NO DISC" or "BAD DISC" will appear on the TV screen.
• After playing back all of the chapters in the title, the DVD player stops automatically and shows the menu screen.
3. Start playback
Press PLAY button to start playing. (Some discs may play automatically).
If a DVD disc menu appears on screen
Press the DIRECTION buttons to select the desired feature in the menu.
Press ENTER button to confirm a selection in the menu.
4. Adjust the volume
Turn the volume control on main unit to the desired volume level.
Problem disc messages
The following message will be displayed on screen when there is a format problem with loaded disc:
"WRONG REGIONAL DISC"
Region code of the disc is not matching to the player's (region 1 to region 6)
"WRONG PASSWORD"
The rating level of the disc Is higher than the rating level setting of the player.
The player will not play the disc.
"WRONG DISC"
The player is equipped with automatic disc quality detection software. When the player detects a problem or damaged
disc, the unit may play the disc at a lower quality or stop completely, depending on the damaged level of the disc.
Production qualities of DVD discs vary. Some discs may deviate from the industry
standard. Some incorrectly formatted discs may be played. However, the playback and
operational quality may be substandard.
POWER management
If the player will not be in use for a long period of time, please push power switch to OFF position.
.11.
Advertisement
