Symptoms
When power is not
supplied
When the washer
won't start
When the washer
makes a loud shaking
noise
When water leaks
from water supply
hose connecting part
When a touch button
does not work
Checklist
●
Did you press Power switch?
●
Isn't the power cord unplugged?
●
Is the earth leakage circuit breaker turned
off?
●
Is it powered by 200V?
●
Did you close the lid and press Start/Pause
button?
●
Is water filled up to the selected water
level?
●
Is a faucet turned off?
●
It the laundry tangled up in one side?
●
Is the washer level?
●
Are there any unnecessary objects around
the washer??
●
Are the connectors and fittings completely turned off?
●
Is the connector tightly inserted in a faucet?
●
Are the connector and water supply hose properly
connected?
●
Did you press the button with gloves on?
●
Are there any impurities on the button?
Troubleshooting
●
Press Start/Pause button.
●
Wait until water is filled up to the
selected water level.
●
Turn on the faucet.
●
Lay the laundry flat.
●
Level the washer using height
adjusting legs and height adjusting
liners. (p35)
●
Clear things out around the
washer.
●
Reconnect water supply hose.
(p32)
●
Touch button may not work
depending on the material or
thickness of the gloves. Press after
taking the gloves off.
●
Wipe the button and try again. .
39