LG T2432S0Z User Manual page 82

How to connect a drain hose
Check if a hose clip and a spring are
properly inserted.
2
Face a drain hose to the drain direction, and
push it to the drain hole of the washer to
insert.
※ If you want to change the drain hose
direction, pull the elbow hose out and
push back to the desired direction.
Cautions when inserting a drain hose
If a drain hose is installed as below, it may not drain or spin. Follow the instructions.
● If you use by connecting a drain
hose, make the length less than 3m.
● Do not let the drain hose sit on a high
door sill. (less than 6cm)
Less than 3m
When using by connecting a drain hose
Existing drain hose
Drain hose for extension
※ The drain hose for extension can be purchased from LG Electronics store or service center.
34
● Avoid sharp bend in hose.
Less
than
6cm
2
Move hose clip
under the
connecting
part.
Hose clip
Hose clip
3
Pull elbow hose Push the drain
out from the hose for extension
drain hose for all the way to the
extension. existing drain hose
to connect.
Elbow hose
※ Check for electricity leakage before using.
Spring
Elbow hose
● Do not let the hose end submerge in
water.
● Avoid sharp bend in hose.
4
Move hose clip
to the center of
the connecting
part.