BenQ x3100i User Manual page 29

Entering the password recall procedure
1. Press and hold OK for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to
decode the number. You may be required to
provide proof of purchase documentation to verify
that you are an authorized user of the projector.
Changing the password
1. Go to Advanced menu - System > Security Settings. Press OK. The Security Settings page
appears.
2. Highlight Change Password and press OK.
3. Enter the old password.
• If the password is correct, another message Input New Password appears.
• If the password is incorrect, the password error message will appear, and the message
Input Current Password appears for your retry. You can press BACK/
change or try another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
To disable password protection, go to Advanced menu - System > Security Settings > Power
On Lock, press OK and / to select Off. The message Input Password appears. Enter the
current password.
• If the password is correct, the OSD menu returns to the Security Settings page. You will
not have to enter the password next time turning on the projector.
• If the password is incorrect, the password error message will appear, and the message
Input Password appears for your retry. You can press BACK/
try another password.
Though the password function is disabled, you need to keep the old password in hand should you ever need
to re-activate the password function by entering the old password.
Recall Password
Please write down the recall code,
and contact BenQ
Customer Center.
Recall Code:
CJ-2014-541638
Return
to cancel the
to cancel the change or
Operation 29