Table of Contents
Advertisement
Set your washing programme
The control panel permits to select a washing programmes and different options.
When an option button is selected, the corresponding pilot light is on. Otherwise it is off.
For compatibility among washing programmes and options, see the "Washing Programme
Chart". If an incorrect option is selected, the integrated red pilot light of the button 6 flashes
3 times.
1
Programme selector di-
1
Downloaded From WashingMachine-Manual.com Manuals
14
Turn the programme selector dial to the required pro-
gramme. The selector dial can be turned either clock-
wise or counter-clockwise. The green pilot light of the but-
ton 6 starts flashing: the appliance is now switched on.
al
of the button 6 will flash 3 times to indicate a wrong selection.
The appliance will not perform the new selected programme.
• To switch the appliance off, turn the programme selector
dial to the position
• To cancel or change a running programme, switch the ap-
pliance off by turning the programme selector dial to the po-
sition
tor to the desired programme. Start the new programme by
pressing the button 6 again. The water in the tub will be not
emptied out.
2
3
If you turn the programme selector dial to another pro-
gramme when the appliance is working, the red pilot light
.
. Select the new programme by turning the selec-
4
5
6
www.zanussi.com
7.1
7.2
7.3
Advertisement
Table of Contents
