11 SERVICE WORK ON THE CHASSIS
60
Main work
(All standard models)
–
Remove screw
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
S05332-10
Cover the components to protect them against dam-
age.
Do not kink the cables or lines.
–
Remove steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
S05333-10
(350 XC‑F US Factory Edition)
–
Remove screw
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
Cover the components to protect them against dam-
Z03286-10
age.
Do not kink the cables or lines.
–
Remove steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
Z03288-10
1
. Detach the wiring harness.
2
.
3
.
4
.
1
. Detach the wiring harness.
2
.
3
.
4
.