How To Use - Hamilton Beach 730 Manual

How to Use

1. Make sure Drink Mixer is set
to OFF ( ). Plug into outlet.
Place ingredients to be mixed
in Cup and insert Mixing
Shaft until it snaps into place.
Tips
• Cup must always be filled to at least minimum 4 oz (118 mL) mark for
liquids to reach Mixing Shift. Do not fill above maximum 12 oz
(355 mL) mark or liquid may overflow while mixing.
• This Drink Mixer is great for mixing protein drinks. Syrups and
powders should be added just before mixing to prevent sinking to
bottom of Cup.
2. Place Cup onto Drink Mixer,
making certain Cup's top
edge is behind Cup Support
and Cup bottom is on Cup
Rest.
3. Move Control Switch to
desired speed to process.
Start with 1 (low) speed;
then increase to 2 (high)
speed if desired. For hard ice
cream or very thick shakes,
remove Cup from Rest and
Support. With Mixing Shaft
still submerged in mixture,
move Cup around for more
thorough mixing.
• Most drinks can be mixed in less than 2 minutes.
• If using fresh fruit, always mash or puree before adding to ingredients
in Cup.
• All liquids should be as cold as possible for a thicker and more frothy
drink.
• Drink Mixer is not designed to crush ice.
4. When finished, turn unit to
OFF ( ) and tilt Head up.
Remove Cup, pour contents
from Cup, and serve.
5