Table of Contents
Advertisement
Camera Recording
Using the LCD Monitor
Before you begin...
View recording scene on the LCD (Liquid
* Connect Camcorder to power source.
Crystal Display).
¢ insert cassette with record tab (page 13).
1
Press LCD-OPEN to unlock LCD.
2
Swing LCD fully open and adjust
viewing angle.
c
Caution:
Rotating partially open LCD monitor
may block cassette door and damage
Camcorder body.
3
Set POWER to CAMERA.
e LCD monitor turns off/on by the
POWER switch.
* Viewfinder shuts off when LCD is
fully opened and turns back on
when LCD is closed completely.
* Both Viewfinder and LCD monitor
turn on when LCD is at 180° (see
below left).
This allows both you and the subject
to view the recording.
4
Turn BRIGHT control to adjust LCD
brightness level.
5
Press RECORD/PAUSE to start
recording (page 21).
Note:
* Using LCD reduces battery operation time.
* To hear sound while recording, connect
ae
(earphone)
earphone (M3 type: not supplied) to
PHONE jack. Earphone volume cannot be
changed while in CAMERA mode.
* Lock LCD closed when not in use.
22
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
