Table of Contents
Advertisement
Replacing Clock/Remote Battery
The clock and remote batteries are pre-installed. Follow the steps below if replacement
becomes necessary.
WARNING:
-
Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another
battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
away from children. Do not recharge, disassemble or dispose of in fire.
Clock Battery
Tripod Mounting Hole
While pinching 2 tabs, pull Battery
Tray out.
Bend 1 tab to remove Battery.
into Battery Tray.
* Do not reverse the polarity.
1
2
3
Snap new Battery ($9 mark down)
4
Insert Battery Tray so the triangle |
marks meet.
Note:
+ Keep Battery out of children's reach.
3 ae
$
.
Swallowing it may be harmful.
* Improperly installed, discharged, or
missing battery causes "CLOCK - `
l
BATTERY" to appear when DISPLAY is
pressed.
* Battery life is approximately 5 years.
Remote Battery
1
O While pressing stopper tab,
A 403
© pull Battery Tray out.
2
Insert battery into tray with
$ mark down.
Do not reverse polarity.
EVE
uol
3
Replace Battery Tray.
49
Advertisement
Table of Contents
