Table of Contents
Advertisement
Tape O eration
(continued)
*Important: If the remotecontrolPOWER, ACTION, PROG, CHIVY, INDEX or ADD/DLT buttondoes not
workwhen pressed, pressthe VCR buttonon the remoteand trythe buttonagain.
VHS Index Search System
Eachtimeyoustarta recording, a n invisible indexmarkis placedon thetape. Whentimerrecordings are
made,programindexand programinformation (see =TimeStampFeature"on page 21) are alsoincluded.
You canthen usetheseindexmarkstoaccessor scanyourrecordings.
2
3
1
24
REWIND
FAST FORWARD
4
4
Direct Access
(For normal and/or timer recordings)
This feature allows you to go directly to the recording you want from
anywhere on the tape by entedng the appropriate index number.
1
Press INDEX* to display the
"SELECT SEARCH MODE" screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step 3.
2
Press AV
to select "INDEX
I
SEARCH," and then press b"
I
to display the "INDEX" screen.
3
Press a NUMBERED key to
I
select the desired recording.
/
To calculate the number, see below.
[__1
REW_D
4
Press REW or FF to start a
re--verse
I
or forward search.
|
When the designated location is reached, |
the VCR goes into Playback mode.
t
SELECT SEARCH MOOE
H
mM
PROGRAM INOEX SEARCH
SELECT:&
• KEY
SET
:=,. KEY
END
: INOEX KEY
FAST
FORWARD
4
1
INOEX
04
I
INOEX
SEARCH
04
]
To calculate
the Index Number
Count forward or backward
each recording starting point, including
the recording you want to see, from wherever
you are on the tape.
Example 1:
If you are watching recording 4 and you want to watch recording 2, count the
start points to number 2. The total is 3. Enter 3 in step "3" and press REW.
Example 2:
,
If you are watching recording 2 and you want to watch recording 6, count
the start points to number 6. The total is 4. Enter 4 in step "3"and press FF.
NOTE: _, indicates start points of each recording.
Advertisement
Table of Contents
