Download Print this page

Standard Features - True TA1HPT-1S-1S Specifications

Ta specification series: pass-thru solid door heated cabinet

Advertisement

Model:
TA1HPT-1S-1S

STANDARD FEATURES

DESIGN
• True's solid door pass-thru heated cabinets are
designed with enduring quality that protects
your long term investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C to 82.2°C).
Heating system controlled by exterior on/off
switch and temperature control dial.
• Two (2) stainless steel (for corrosion resistance),
fi nned tube heating elements (1000 watts each)
for uniform generation of electric heat. Cabinet
comes with a total of 2000 watts.
• Equipped with low-velocity fans to assure even
temperature distribution throughout the cabinet.
Fans are controlled by exterior on/off switch.
• Manually controlled vent located on top of the
cabinet for positive humidity control.
• 12" x 20" (305 mm x 508 mm) pan for water
included, if additional humidity required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors, front,
sides, back and bottom.
• Interior - NSF approved anodized aluminum
walls. 300 series stainless fl oor with coved
corners.
• Insulation - entire cabinet structure and solid
doors are foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail dipped
in rust inhibiting enamel paint for corrosion
protection inside and out.
• Frame rail fi tted with 6" (153 mm) stainless steel
legs.
DOORS
• Front and rear doors are 300 series stainless steel
exterior and liners. Doors open within cabinet
dimension.
• Door locks standard.
PLAN VIEW
1
(31 mm)
WARRANTY
One year warranty on all parts
& labor (U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
TA Specifi cation Series:
Pass-Thru Solid Door Heated Cabinet
• Lifetime guaranteed recessed door handles. Each
door fi tted with 12" (305 mm) long recessed
handle that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
• Positive seal self-closing doors with 120° stay
open feature. Lifetime guaranteed door hinges.
• Magnetic door gaskets of one piece construction,
removable without tools for ease of cleaning.
SHELVING
• Three (3) chrome shelves 25"L x 28
mm x 732 mm) with shelf clips and wall mounted
pilasters (fi eld installed). 1
ensures optimum airfl ow.
• Aluminum shelf support pilasters. Shelves are
adjustable on
• Three (3) different interior kits available (see Kit
Options) (upcharge applies). Pilasters and tray
slides require fi eld installation.
LIGHTING
• Incandescent interior lighting - lights activated by
exterior on/off switch, safety shielded.
MODEL FEATURES
• Exterior, color coded, temperature display;
accurate direct reading of internal cabinet
temperature.
• Designed to hold warm baked or cooked food.
Cabinet is not designed to heat ambient or cold
product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires that a sole use circuit be dedicated
for the unit.
• Unit completely pre-wired at factory and ready
for fi nal connection to a 115/208-240/60 Hz.
single phase - 20 amp dedicated outlet. Cord and
plug set included.
(1958 mm)
3
/
"
16
ELEVATION
(154 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
13
/
"D (635
16
1
/
" (27 mm) standoff
16
1
/
" (13 mm) increments.
2
115/208-240/1
NEMA-14-20R
1"
(26 mm)
77"
38
(973 mm)
3
78
/
"
16
(1986 mm)
1
1
/
1
85
/
"
4
(27 mm)
(2166 mm)
1
6
/
"
16
Model
KCL
TA1HPT-1S-1S
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 6" (153 mm) seismic/fl anged legs.
❒ 4" (102 mm) diameter stem castors.
❒ Stainless steel rail skirt for use with legs (fi eld
installed).
❒ Additional shelves.
❒ Stainless steel (electro polished) shelves.
❒ Metal door handles (factory installed).
❒ Electronic temperature control (factory installed).
❒ Correctional facilities options.
❒ Curb mountable units.
KIT OPTIONS
Upcharge applies. Lead times may apply.
❒ Kit #1: Nine (9) sets of #1 type tray slides and
pilasters (fi eld installed), bottom support of one
(1) 18"L x 26"D (458 mm x 661 mm) pan or two
(2) 14"L x 18"D (356 mm x 458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod tray
slides and pilasters (fi eld installed), rim support of
one (1) 18"L x 26"D (458 mm x 661 mm) pan.
❒ Kit #3: Six (6) sets of universal type tray slides and
pilasters (fi eld installed), bottom support of one
(1) 18"L x 26"D (458 mm x 661 mm) pan, two (2)
14"L x 18"D (356 mm x 458 mm) pans or two (2)
12"L x 20"D (305 mm x 508 mm) pans.
❒ Additional kit option components available
individually.
23
26
/
(679 mm)
9
1
/
"
37
/
32
4
(947 mm)
FRONT OF CABINET
"
32
23
26
/
(679 mm)
29"
(737 mm)
PLAN VIEW
Front
Side
TFQY79E
TFQY81S
"
32
11
90
/
"
16
(2304 mm)
"
"
32
Plan
3D
TFQY89P
TFQY813

Advertisement

loading