Advertisement
Model:
TR2HPT-2S-2S
STANDARD FEATURES
DESIGN
• True's solid door pass-thru heated cabinets
are designed with enduring quality that
protects your long term investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• Two (2) stainless steel (for corrosion
resistance), fi nned tube heating elements
(1000 watts each) per section for uniform
generation of electric heat. Cabinet comes
with a total of 4000 watts.
• Equipped with low-velocity fans to assure
even temperature distribution throughout
the cabinet. Fans are controlled by exterior
on/off switch.
• Manually controlled vent located on top of
the cabinet for positive humidity control.
• 12"L x 20"D (305 mm x 508 mm) pan for
water included, if additional humidity
required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors,
front, sides, back and bottom.
• Interior - 300 series stainless steel liner
and fl oor.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 6" (153 mm) stainless
steel legs.
PLAN VIEW
ELEVATION
WARRANTY
One year warranty on all parts
and labor (U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
TR Specifi cation Series:
Pass-Thru Solid Door Heated Cabinet
DOORS
• Front and rear doors are constructed with
300 series stainless steel exterior and liner.
Doors open within cabinet dimension. Door
locks standard.
• Lifetime guaranteed recessed door handles.
Each door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Positive seal self-closing doors with 120° stay
open feature. Lifetime guaranteed door
hinges and torsion type closure system.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• One (1) factory installed, interior kit option
per full section. Four (4) different interior
kits available (see Kit Options). Pilasters and
tray slides are factory installed at no charge.
LIGHTING
• Incandescent interior lighting; lights
activated by exterior on/off switch, safety
shielded.
MODEL FEATURES
• Designed to hold warm baked or cooked
food. Cabinet is not designed to heat
ambient or cold product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires a sole use circuit be dedicated
for the unit.
• Unit comes with 4 feed wires (including
ground) to be hardwired at installation site
to a 115/208-240/60 Hz. single phase, 20
amp dedicated outlet.
77"
(1956 mm)
3
1
/
"
16
(31 mm)
1
6
/
"
16
(154 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
1"
(26 mm)
3
78
/
"
16
(1986 mm)
85
1
/
"
4
(2166 mm)
Model
KCL
TR2HPT-2S-2S
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead time may apply.
❒ Seismic/fl anged legs.
❒ Stainless steel rail skirt for use with legs
(fi eld installed).
❒ Metal door handles (factory installed).
❒ Electronic temperature control (factory
installed).
❒ Correctional facilities options.
❒ Curb mountable units.
KIT OPTIONS
❒ Kit #1: Nine (9) sets of #1 type tray slides and
pilasters (factory installed), bottom support
of one (1) 18"L x 26"D (458 mm x 661 mm)
pan or two (2) 14"L x 18"D (356 mm x
458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod
tray slides and pilasters (factory installed),
rim support of one (1) 18"L x 26"D
(458 mm x 661 mm) pan.
❒ Kit #3: Six (6) sets of universal type tray slides
and pilasters (factory installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan, two (2) 14"L x 18"D (356 mm
x 458 mm) pans or two (2) 12"L x 20"D
(305 mm x 508 mm) pans.
❒ Kit #4: Three (3) chrome shelves 25"L x
13
28
/
"D (635 mm x 732 mm) with shelf
16
clips and wall mounted pilasters (factory
installed). Shelves adjustable on 6"
(153 mm) increments.
❒ Additional kit option components available
individually.
❒ Stainless steel (electro polished) shelves to
be used with Kit Option #4.
(947 mm)
1
1
/
"
32
(27 mm)
FRONT OF CABINET
23
(598 mm)
3
51
/
"
8
(1305 mm)
PLAN VIEW
Elevation
Right
TFQY180E
TFQY196S
TFQY196P
5
84
/
"
16
(2142 mm)
1
37
/
"
4
9
38
/
"
32
(973 mm)
17
/
"
32
Plan
3D
TFQY1963
Advertisement
