Connecting An Audio System; Connecting A Sony Sava Series Speaker System - Sony KP-48V80 Operating Instructions Manual

Disconnect all power sources before making any connections.
Connecting an audio system
system to the projection TV.
1 Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-2,
AUX1, etc.) on the stereo.
2. Set the stereo to the chosen Line input and
use the Audio menu to set the audio
output and switch the TV's speakers off. é
(see "Audio Out" and "Speaker" on page 32)
&
7
me ©) fe". ©
* You can adjust VOLUME, "Bass," : Stereo smiplivier
"Treble," "Balance," "MTS/SAP" and
"Effect" with the supplied remote control.
The control items except VOLUME can be
adjusted only when "Audio Out" is set to
"Variable" in the Audio menu. (see
"Audio Out" on page 32)
AUDIO-R
(red)
Line inputs
@
(Rear of projection TV)
SAVA series
speaker system
CT a
Ah HS. IE
OH
1)
i [E
AUDIO-L
. (White)
Connecting a Sony SAVA series
speaker system
Use this connection to control the speaker's
Dolby Pro Logic surround system and super
CONTROL S IN
D ®
AUDIO-R TINR
(red)
10 @06 |; 1 @oO6
14