Installation - Kenwood TS-120S Operating Manual

1. SINGLE-CONVERSION SYSTEM USING ALL
CIRCUITRY
The single-conversion system, with a unique Phase Locked
Loop circuit, FET balanced mixers and MOS FET's, assures
excellent spurious and intermod characteristic
2. BUILT-IN DIGITAL DISPLAY
The digital display affords easy reading of operating frequen-
cy to an accuracy of 100 Hz on any band and any mode
3. BUILT-IN IF SHIFT CIRCUIT (Passband Tuning)
'An IF SHIFT systom is built into the transceiver to allow shi
ting of the IF passband, thereby eliminating adjacent
channel interference.
4, 3.5 ~ 29.7 MHZ AND WWV BANDS.
'The transceiver is designed to operate on LSB/USB/CW in
the 3.5 ~ 29.7 MHz bands, WWV (14.5 ~ 15 MHz) is also
built into the transceiver to permit accurate frequency
calibration.
5. COMPACT. LIGHTWEIGHT DESIGN
'The TS-120S(V) has many advanced features. yet it is com:
pact and lightweight, suitable for mobile and field operations.
{as wall as fixed-station operation,
6. EASY OPERATION
All controls and switches are carefully arranged for easy of
operation, ensuring convenience and versitilty
2.1 ACCESSORIES
The following accessories are furnished with the TS:
12081V)
Instruction manual
External speaker plug
7P DIN remote plug
DC power cord
Fuse. 20A (TS-120S)
4A (TS-120V)
SECTION 1. FEATURES
7. ALL SOLID-STATE DESIGN
8. FOUR FIXED CHANNELS
Four FIXED channels can be installed, one for each of 7. 14,
21 and 28 MHz bands. The 3.5 MHz and 28 MHz FIXED.
XTAL position can be exchanged by simply moving a con-
Rector on the AF-GEN unit.
SECTION 2. PREPERATION FOR USE 1
2.2 INSTALLATION
Allow adequate ventilation, particularly during mobile opera
tion