HOW TO USE THE WASHER
OPTION
1. Prewash
• Use this option for loads that need pretreatment.
Adds 16 minutes prewash and drain.
2. Rinse+Spin
• Use this option to rinse and then spin.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining in the cycle when
(grating,
b) the error code when an error has been
detected.
STATUS INDICATOR
• These lights show which portion of the cyde the
washer is operating.
3. Extra Rinse
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent
or bleach residue from garments.
4. Stain cycle
• Adds time to the wash and rinse for better stain
removal.
• Automatically provides a rinse.
5. Water Plus
CHILD LOCK
PRE-WASH
ACHaOlOCX
• Use this option to prevent unwanted use of the
washer. Press and hold PRE WASH button for 3
seconds to lock/unlock control.
• When Child lock is set. CHILD LOCK lights and all
buttons are disabled except the Power (e) button.
You can lock the washer while it is operating.
• Adds extra water to the wash and rinse cycles lor
superior results.
6. SPINSENSE™
• SPINSENSE'" can be used when there Is a vibration
problem, especially on wood floor Installations.
• To operate SPINSENSE'" press and hold the Stain
Cycle button for 3 seconds when the washing machine
Is running on any cycle.
• When SPINSENSE'" has been selected, the Spin
Speed button light will blink on and off continually to
Indicate that the SPINSENSE'" function has been
selected.
• Push and hold the Stain Cycle button again for 3
seconds to cancel SPINSENSE™
• Once SPINSENSE'" has been selected, if will continue
to function even if Interrupted by a power failure.
DOOR LOCKED
• Lights whenever the door of the washer is locked.
• The door can be unlocked by pressing the
Start/Pause(^ button to stc^ the washer.
NOTH: If the water temperature or the level is too
high, the door cannot be unlocked.
I)n not try to force the door open when
DOOR LOCKED lights on.
16