Casio SF-4400 Owner's Manual page 6

Operation Reference
Setting Up the SF Unit
After batteries are loaded, use the folowing procedures to set up the SF Unit for
operation.
™@ To switch power on and off
1. Press ON to switch power on,
« The initial screen for the mode that was selected when you last switched
power off appears on the display.
« (f the data error message appears on the display, follow the procedures
described on page 10.
« ffnothing appears on the display when you switch power on, replace batteries
as soon as possible.
2. Press OFF to switch power off.
— About the Auto Power Off function...
The SF Unit is equipped with an Auto Power Off function that switches
power off automatically whenever you do not perform any key operation for
about six minutes. To restore power, press ON.
Setting Up the SF Unit
E To adjust the display contrast
Enter the Telephone Directory Mode.
You could enter any made except the Calculator mode here.
Press SHIFT and confirm that the "S" indicator is on the display.
Press CONT.
Use the <J and D> keys to adjust the contrast.
RECONTRAS DO
¢(LIGHTERD
PONen
(DARKER >>
16
18
PART 2 Operation Reterence
i@ To check the memory status
AKA CAPAC TTY Hotoke
Remaining memory+ FREE
27678
a4
capacity
rUSED
901
°
| a 8
Tota! number of characters stored in memory
SCHED AL @ON OFF
REMINDER #ON OFF
DAILY AL ON®QEF
KEY ©ON OFF
s | /
os
I
Dot indicates on/off status
Inputting Letters, Numbers, and Symbols
@ To switch the key input tone on and off
Press FUNC once to display the first function menu.
Press 4 to select the SOUND menu item.
Use 4 and V to select KEYS.
Use <J and D to switch the key input tone on and off.
Press SET to store your setting and clear the SOUND menu.
FsON>
@ To display the main menu screen
Press MENU to display the main menu screen.
Main Menu Screen
S/E)Se2 a g8I
Menu Icons
@® Telephone Directory Mode
@ Memo Mode
@ Reminder Mode
@ Schedule Keeper Mode
® Calendar Mode
© Calculator Mode
@ Game Mode
To change modes
You can change modes either by selecting an icon or by inputting a number.
@ To change modes by selecting an icon
1 pepley the main menu screen.
2. The icon of the currently selected mode is highii
ighlighted on the display. Use
Aa.Yv, d, and D to change the selected menu icon. Pre
3. When the icon for the mode you want is selected (highlighted), press SET.
To change modes by inputting a number
Display the main menu screen.
input a number from t to 7 to specify the mode you want to enter.
v=" @
Note
M To input letters and numbers
Press the key that is marked with the letter or number that you want to input.
@ To input upper-case letters
19