Canon HG10 Instruction Manual page 98

Hide thumbs Also See for HG10:
Table of Contents

Advertisement

"
,(' l1
n!
~Ol
,nation
Message
Explanation
PAPER JAM
The paper jammed during printing. Select [STOP] to cancel printing. Alter removing the
paper, set some paper again and retry printing.
INK ERROR
There is a problem with the ink. Replace the ink cartridge.
NO INK
The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.
INK ABSORBER FULL
Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list
included with the printer) to replace the ink absorber.
• FILE ERROR
You attempted to print an image that was recorded with another camcorder, has a
• CANNOT PRINT'
ditterent compression, or was edited on a computer.
COULO NOT PRINT XIMAGES
You attempted to use the print order settings to print Ximages that were recorded with
another camcorder, with a ditterent compression or were edited on a computer.
SET
~
PRINT OROER
No still image on the memory card has been marked with a print order.
~
PRINT ORDER ERROR
You attempted to set more than 998 still images in the print order.
CANNOT TRIM
You attempted to trim an image that was recorded with another camcorder.
READJUST TRIMMING
You changed the [PAPER) settings alter applying the trimming settings.
PRINTER ERROR
Cancel printing. Turn ott the printer and turn it back on. Check the printer status. If the
error still persists, refer to the printer's instruction manual and contact the appropriate
customer support center or service center.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn ott the printer. Alter a While, turn the
printer back on and reconnect the USB cable. Check the printer status.
When you are printing using the
~ ~
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn ott the printer and turn it back on. Check the printer status. If the
printer is equipped with a battery, it might be exhausted. In such case, turn ott the
printer, replace the battery and turn it back on.
COMMUNICATION ERROR
The printer is experiencing a data transfer error. Cancel printing, disconnect the USB
cable and turn ott the printer. Alter a while, turn the printer back on and reconnect the
USB cable. When you are printing using the
~ ~
button, check the print settings.
Dr, you attempted to print from a memory card that contains a large number of images.
Reduce the number of images.
CHECK PRINT SETIINGS
Current print settings cannot be used for printing with the
~ ~
button.
INCOMPATIBLE PAPER SIZE
The paper settings of the camcorder conflict with the printer's settings.
PRINTER IN USE
The printer is in use. Check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper position.
PRINTER COVER OPEN
Close the printer cover securely.
NO PRINTHEAD
No print head is installed in the printer or the print head is defective.
98
"
,(' l1
n!
~Ol
,nation
Message
Explanation
PAPER JAM
The paper jammed during printing. Select [STOP] to cancel printing. Alter removing the
paper, set some paper again and retry printing.
INK ERROR
There is a problem with the ink. Replace the ink cartridge.
NO INK
The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.
INK ABSORBER FULL
Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list
included with the printer) to replace the ink absorber.
• FILE ERROR
You attempted to print an image that was recorded with another camcorder, has a
• CANNOT PRINT'
ditterent compression, or was edited on a computer.
COULO NOT PRINT XIMAGES
You attempted to use the print order settings to print Ximages that were recorded with
another camcorder, with a ditterent compression or were edited on a computer.
SET
~
PRINT OROER
No still image on the memory card has been marked with a print order.
~
PRINT ORDER ERROR
You attempted to set more than 998 still images in the print order.
CANNOT TRIM
You attempted to trim an image that was recorded with another camcorder.
READJUST TRIMMING
You changed the [PAPER) settings alter applying the trimming settings.
PRINTER ERROR
Cancel printing. Turn ott the printer and turn it back on. Check the printer status. If the
error still persists, refer to the printer's instruction manual and contact the appropriate
customer support center or service center.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn ott the printer. Alter a While, turn the
printer back on and reconnect the USB cable. Check the printer status.
When you are printing using the
~ ~
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn ott the printer and turn it back on. Check the printer status. If the
printer is equipped with a battery, it might be exhausted. In such case, turn ott the
printer, replace the battery and turn it back on.
COMMUNICATION ERROR
The printer is experiencing a data transfer error. Cancel printing, disconnect the USB
cable and turn ott the printer. Alter a while, turn the printer back on and reconnect the
USB cable. When you are printing using the
~ ~
button, check the print settings.
Dr, you attempted to print from a memory card that contains a large number of images.
Reduce the number of images.
CHECK PRINT SETIINGS
Current print settings cannot be used for printing with the
~ ~
button.
INCOMPATIBLE PAPER SIZE
The paper settings of the camcorder conflict with the printer's settings.
PRINTER IN USE
The printer is in use. Check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper position.
PRINTER COVER OPEN
Close the printer cover securely.
NO PRINTHEAD
No print head is installed in the printer or the print head is defective.
98

Advertisement

Table of Contents
loading

Table of Contents