Canon HG10 Instruction Manual page 125

o
IMPORTANT
• Do not disconnect the camcorder's
power source or USB cable while using
this software. Doing so may result in
damage to the camcorder's hard disk
and permanent data loss. Insert a fully
charged battery pack into the
camcorder in advance and use the
compact power adapter. Do not allow
the USB cable to be inadvertently
disconnected. Before disconnecting
the USB cable, use the "Safely Remove
Hardware" icon in the System Tray to
end the connection.
• While the camcorder is connected to
the computer, make sure the computer
does not enter power saving mode.
GuideMenu - Movie Backup and
Transfer
You can back up movies recorded with
the camcorder onto the computer or
transfer those movies back. You can
also use DVD MovieFactory SE to
create high-definition AVCHD discs
and standard-definition DVD discs.
Refer to Creating an AVCHD Disc or a
DVD-Video Disc (CD 10) for details.
I
Backing Up your Movies
Back up movies you recorded with the
camcorder onto the computer's hard
disk. You can use DVD MovieFactory
SE to edit your movies and WinDVD SE
to play them back.
1
Click [Save Files to PC].
2
Select the folder where you want
to save the files and click [Next].
Select a folder on the computer's
built-in hard disk.
3
Select the scenes you want to
save and click [Start].
• You can also click on the following
buttons.
~:
Select all scenes at once.
IQJ :
Remove the checkmarks from
all selected scenes at once.
• If there are less than 3 GB of
available hard disk space, the
backup operation will not start.
• It may take some time to display
all the scenes' thumbnails.
4
When the files have been saved
successfully, click [OK].
7
I
o
IMPORTANT
• Do not disconnect the camcorder's
power source or USB cable while using
this software. Doing so may result in
damage to the camcorder's hard disk
and permanent data loss. Insert a fully
charged battery pack into the
camcorder in advance and use the
compact power adapter. Do not allow
the USB cable to be inadvertently
disconnected. Before disconnecting
the USB cable, use the "Safely Remove
Hardware" icon in the System Tray to
end the connection.
• While the camcorder is connected to
the computer, make sure the computer
does not enter power saving mode.
GuideMenu - Movie Backup and
Transfer
You can back up movies recorded with
the camcorder onto the computer or
transfer those movies back. You can
also use DVD MovieFactory SE to
create high-definition AVCHD discs
and standard-definition DVD discs.
Refer to Creating an AVCHD Disc or a
DVD-Video Disc (CD 10) for details.
I
Backing Up your Movies
Back up movies you recorded with the
camcorder onto the computer's hard
disk. You can use DVD MovieFactory
SE to edit your movies and WinDVD SE
to play them back.
1
Click [Save Files to PC].
2
Select the folder where you want
to save the files and click [Next].
Select a folder on the computer's
built-in hard disk.
3
Select the scenes you want to
save and click [Start].
• You can also click on the following
buttons.
~:
Select all scenes at once.
IQJ :
Remove the checkmarks from
all selected scenes at once.
• If there are less than 3 GB of
available hard disk space, the
backup operation will not start.
• It may take some time to display
all the scenes' thumbnails.
4
When the files have been saved
successfully, click [OK].
7
I