Operatingthe Vcr - JVC TH-M606 Instructions Manual

Operating externalcomponents withthe remote control
5 Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrokt product:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
5
Manufacturer Code
Echostar 21
GI Jerrold 0l, 02, 03, 04, 05, 06, 07, 0g
Hamlin 15, 16, 17, 18
Pioneer 13, 14
RCA 19
Scientific Athmta 09, 10
Sony 20
Zenith I I, 12
1
O Release ©/I VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
• Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector to
VCR/DBS.
2 Press DBS.
DBS
vo oo4 ¢0
The following buttons are available:
O/I VCR/DBS: Turns DBS tuner or CATV converter on and
off.
CHANNEL +1-: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
Operating the VCR
• Toset the manufacturer'scode
1 Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold ©/I VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
See page 16 for button locations. I
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR:
Press 0, then 9.
For an NEC VCR:
Press 2, then 5.
Manufacturer Code Manufacturer Code
JVC 0l, 1)2,03 Philips 09
Emerson I l, 26 RCA 05, 06
Fisher 29 Samsung 24
Funai 10, 14, 15, 16 Sanyo 21, 22, 23
Gold Star 12 Sharp 27, 28
Hitachi 04 Shimom 30
Mitsubishi 13 Sony 18, 19, 20
NEC 25 Zenith 08
Panasonic 07, 17
1
0 Release ©/I VCR/DBS.
If there is more than one code listed for your brai_ld, try each
one until you enter the correct one.
• Operation
Aim the remote control at the VCR.
IMPORTANT
Be_re using the remote control to operate a
VCR;
1 Set the remote control mode selector to
VCR/DBS.
2 Press VCR.
4€,e
VCP#DB
The following buttons are available:
©/I VCR/DBS:
Turns VCR on and oft'.
(play button): Starts playback.
• : Stops operation.
II :
Pauses playback.
I)-I)- : Fast forwards video tape.
41_1 : Rewinds video tape.
REC: Press this button together with I_ (play button) to
start recording or together with n to pause
recording.
CHANNEL +/-: Changes the TV channels on the VCR.
NOTE
When operating a VCR or DBS tuner/CATV converter:
• The source setting of VCR nr DBS remains afler you have changed
the remote control mode selectnr to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR or DBS after setting the remote control mode selector.
17