Advertisement
To listen to a Dolby NR recorded tape
Dolby noise-reduction
indicators
Hel oj] Se
& we
| Sammy» reverse modes
editing
Dolby NR ———
8
c
If neither Dolby noise-reduction system
was used, press the button
corresponding to the Dolby noise-
reduction indicator that is illuminated.
(The indicator will then switch OFF.)
Press if the tape was recorded by the type-C
Dolby NR system. (The "'C'' Dolby noise-
reduction indicator will then illuminate.)
About the Dolby noise-reduction
recording/playback system
The
Dolby
noise-reduction
system
is a system
designed
to
effectively reduce the annoying high-frequency "hissing" noise
typically heard from tapes if this system is not used. During
recording,
the system
functions
to increase
the level of the
high-frequency part of the sound, and then, during playback,
that same portion is weakened and returned to the previous level.
This unit includes two types of Dolby noise-reduction systems,
the Dolby B NR-type and C NR-type.
Hi Dolby B-type noise-reduction system
Noise is reduced to about one-third.
Use this system when playing back tapes recorded by the Dolby-
B noise-reduction system, such as prerecorded music tapes, etc.
Wi Dolby C-type noise-reduction system
Noise is reduced to about one-tenth.
Use this system for the recording and playback of sound sources
that have a wide dynamic range and good tone quality, such as
FM broadcasts of live performances, etc., and for playing back
such tapes.
Dolby noise reduction manufuctured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY"
and the double-D symbo!
DO
are trademarks of
Dolby Laboratories Licensing Corporation.
WEVaCelte JEW orl eit
ilar
Reverse-mode indicators
Reverse-mode selectors
reverse mode
The reverse-mode selectors are used to select either of three
different playback modes.
Note:
A tape
can
be
advanced,
rewound,
or
substituted,
from
whichever deck is not in operation at that moment.
+— Select this mode to playback only one side
of a cassette tape.
(The " ="
reverse mode-indicator will then illuminate.)
When the playback has finished, tape movement will stop
automatically.
This playback will continue eight times or until the stop
button is pressed.
For deck 2
Select this mode to playback both sides of
a cassette tape continuously.
(The ">"
reverse-mode indicator will then illuminate.)
This playback will continue eight times or until the stop but-
ton is pressed.
(One ''time" is counted when side '"B" of the tape finishes
playback. If playback is started from side ''B"', side "A" will
play only seven times.)
©O Select this mode to playback both sides of a
cassette tape in deck 2 and only one side of
a cassette tape in deck 1 continuously. (This
is called "series playback".)
(The "©"
reverse-mode indicator will then illuminate.)
This mode
is convenient for enjoyment of a long period
of uninterrupted background music.
(One "time"
is counted
when
side "A" of the tape in
deck 1 finishes playback. If playback is started from deck 1,
the tape in deck 2 will play only seven times.
Advertisement
