Table of Contents
Advertisement
10
The Multi-Timbral Mode
When the Multi-Timbral mode is ON, MIDI data arriving
on several channels can be received. This allows you to
simultaneously play several of the piano's internal sounds.
* When the Multi-Timbral Mode is OFF
Data that arrives on the specified Receive
channel (see
page 9) is received and used to play the currently
selected Voice.
* When the Multi-Timbral Mode is ON
Of anv MIDI data that arrives, that which arrives on
channels 1,
11, 12, 13, 14 and 15 is received. Data on
all other channels is ignored.
The Voice that is used to play the notes will be deter-
mined by the Program Change message that is received
on the relevant channel. The correspondence between
Program Change Numbers and Voices is shown on page
Mi.
While holding down the FUNCTION button, press the
PIPEORGAN button to turn the Multi-Timbral Mode ON
or OFF.
With the indicator lit, it is ON.
PIPE
La
ORGAN
FUNCTION
15
How Various Types of Messages Function While the
Multi-Timbral Mode is ON
* Pedal Messages
Damper, sostenuto and soft pedal messages function
independently for any of these channels: 1, 11, 12, 13,
t4or 15.
* Volume Messages
Volume messages control the volume, and function
independently for any of these channels: 1, 11, 12, 13,
14 or 15. Such messages, however, have no effect on
what is played on this instrument's keyboard.
The actual volume obtained is determined by both the
value of the Volume message, and the position of the
Volume knob on this instrument. When a Volume
message calls tor the maximum value, the actual
volume produced will directly reflect the position of the
Volume knob.
* Chorus On/Off Messages
Chorus On/Otf messages affect independently for each
channel 1, 11, 12, 13, 14 or 15.
* Reverb On/Off Messages
Reverb On/Off messages affect all Voices equally,
regardless of whether they are received on channel 1,
11,12, 13, 14 0r 15.
* When the Multi-Timbral Mode is "On," the unit will
always be at "Omni OFF."
Selecting the Transmission/Reception
Mode
Three Transmission/Reception Modes have been provided
to allow vou to select the mode which best matches your
needs.
* Note and Pedal messages are received/transmitted in
every mode.
Hold down the FUNCTION button while you press the
E.PIANO
button to set the Transmit/Receive mode, When
the E.PIANO butlon's indicator is dark, you are in Mode
1. When the E.PIANO bulton's indicator is blinking, vou
are in Mode 2. When the E.PIANO button's indicator is lit,
H
you are in Mode
3.
E PIANO
Mode d
Mode 2
DJ
Mode i
b
* When power is turned on, the unit will always be at
the Mode 1 setting.
While holding
Mode
I
il
iH
MIDE
Messages
Note Messages
TX
RX
TX
RX
IN
RN
Yes Yes Yes Yes Yes Yos
Yes Yes Yes No Yes" Yes
Program Change Messages
Control Change Messages
No Yes No Yes No Yes
Volume
U)
Damper
(64)
Yes Yes Yes Yes Yes Yes
Sostenuto — (66)
Yes Yes Yes Yes Yes Yes
Solt
(67)
Yes Yes Yes Yes Yes Yes
Chorus
On/Oit. idv
No No No No Yes Yes
Reverb On/Ofr. (91)
Nu No No No
Yes Yes
Master Tune
(21
No No
No No
Yes Yos
Roland System Exclusive Messages
Multi-Timbral Mode
No Yes No Yes Yes Yes
Chorus Depth
Reverb Depth
No Yes No Yes Yes Yes
Brilliance
No Yes No Yes Yes Yes
*
In Mode 3, the appropriate Program Change message
will be transmitted whenever you press a Voice button.
(See the following page.)
Advertisement
Table of Contents
