Pentax IQ ZOOM 115M Operating Manual page 44

Correcting the date
Switch the power on.
1. Keep depressing the DATE button # for 3 sec¬
onds, the " Year " digits and will blink.
2. Each time the DATE button # is depressed,
the blinking digits change in the following man¬
ner : Year - Month - Day - Hours - Minutes
Stop depressing the button when desired digits
appear.
3. Move the Zoom lever • to the right or left,
when you wish to change the blinking digits.
The digits increase by one each time the lever
moves to the right and the digits decrease by
one each time the lever moves to the left.
Holding the zoom lever for about one second
will change the digits continuously.
4. After the data has been adjusted, depress the
DATE button • each time until blinking stops.
• The blinking "minutes" allows precise fine-
tuning of the internal clock to the beginning of
a specified minute. To do so, depress the DATE
button # each time until the Minutes digits
starts blinking, and then depress the DATE but¬
ton in sync with a time signal.
• If you release the shutter while the blinking
data is being corrected, the data cannot be im¬
printed.
40