Pentax IQ ZOOM 115M Operating Manual page 17

pb-
1
r®-
1
•
'96 w
1
;1
36 3 P >
5 When " /" appears in the exposure counter on
the LCD panel, the film automatically stops
winding. The indication appears as shown
above.
b If ( 5 ) blinks on the LCD panel, it means the
film is not properly loaded. Reload the film.
• The exposure counter indication will remain on
even if the main switch is turned OFF.
Automatic film speed setting
This camera is designed to use DX-coded films
with ISO rating from 25 to 3200. When any of
these films are loaded, the proper film speed is
automatically set for the camera.
Notes:
• Non-DX coded films cannot be used. If Non-
DX coded film is used, the film speed is auto¬
matically set to ISO 25.
• A film with ISO 400 film speed is recom¬
mended to get less image blur and to cover
more of the photographic situations.
• Use high-speed films with ISO 800 or higher
mainly for shooting indoors or in dimly-lit con¬
ditions.
13