Table of Contents
Advertisement
6. Route the power cable so that it will not contact
the product and get squeezed between the
product and the wall.
•
If this cooking range is to be connected to a new
or upgraded electrical installation, then it must
be connected by a supply cord fitted with:
- An appropriate rated plug that is compatible
with the socket-outlet fitted to the final sub-
circuit in the fixed wiring that supplies this
cooker
- An appropriate rated installation male connec-
tor that is compatible
with the installation female connector fitted to
the final sub-circuit in the fixed wiring that sup-
plies the cooker
•
Push the product towards the kitchen wall.
•
Adjusting the feet of oven
Vibrations during use may cause cooking vessels
to move. This dangerous situation can be
avoided if the product is level and balanced.
For your own safety please ensure the product is
level by adjusting the four feet at the bottom by
turning left or right and align level with the work
top.
Cooling fan
16/EN
2
Control panel
3
Door
The cooling fan cools both the control panel and the
front of the a liance.
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
Future Transportation
•
Keep the product's original carton and transport
the product in it. Follow the instructions on the
carton. If you do not have the original carton,
pack the product in bubble wrap or thick
cardboard and tape it securely.
•
To prevent the wire grill and tray inside the oven
from damaging the oven door, place a strip of
cardboard onto the inside of the oven door that
lines up with the position of the trays. Tape the
oven door to the side walls.
•
Do not use the door or handle to lift or move the
product.
Do not place any objects onto the product and
move it in upright position.
Check the general appearance of your product
for any damages that might have occurred
during transportation.
Advertisement
Table of Contents
