Future Transportation - Beko MSH30B User Manual

Mini oven
Hide thumbs Also See for MSH30B:
Table of Contents

Advertisement

The power cable must not be
clamped, bent or trapped or
come into contact with hot parts
of the product.
A damaged power cable must be
replaced by a qualified electrician.
Otherwise, there is risk of electric
shock, short circuit or fire!
The mains supply data must correspond
to the data specified on the type label of
the product. The rating plate is either
seen when the door or the lower cover
is opened or it is located at the rear wall
of the unit depending on the unit type.
Power cable of your product must
comply with the values in "Technical
specifications" table.
Power cable plug must be within
easy reach after installation (do
not route it above the hob).
While performing the wiring, you
must apply with the national/local
electrical regulations and must
use the appropriate socket
outlet/line and plug for oven. In
case of the product's power limits
are out of current carrying
capability of plug and socket
outlet/line, the product must be
connected through fixed electrical
installation directly without using
plug and socket outlet/line.
Before starting any work on the
electrical installation, disconnect
the product from the mains
supply.
There is the risk of electric shock!
Connect the power cable into the
socket.
• Push the product towards the kitchen
wall.
Final check
1. Check electrical functions.

Future Transportation

• Keep the product's original carton and
transport the product in it. Follow the
instructions on the carton. If you do
not have the original carton, pack the
product in bubble wrap or thick
cardboard and tape it securely.
• To prevent the wire grill and tray inside
the oven from damaging the oven
door, place a strip of cardboard onto
the inside of the oven door that lines
up with the position of the trays. Tape
the oven door to the side walls.
• Do not use the door or handle to lift or
move the product.
Do not place any objects onto the
product and move it in upright
position.
Check the general appearance of
your product for any damages
that might have occurred during
transportation.
15/EN

Advertisement

Table of Contents
loading

Table of Contents