Advertisement
Always disconnect the appliance from the power outlet and cool it down completely
before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to
contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter by pressing
down the tab of filter inside the kettle and then replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside
of the kettle to prevent the gloss loss.
4. When not use or storage, the power cord may be wound under the bottom of kettle.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water may form
scale on the bottom of kettle which can decrease efficiency. You can use commercially
available descaler and follow the instructions on the package. Alternatively, you may follow
below instructions using the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to
cover the bottom of kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water to the
maximum position, boiling and then discard the water. Repeat several times until the odour
of vinegar has flushed away. Any stains remaining inside the spout can be removed by
rubbing with a damp cloth.
CLEANING & CARE
5
Advertisement
