* Remove the Q block assembly. (Refer to 1-3-2.)
* Remove the A board. (Refer to 1-3-3.)
* Remove the C board. (Refer to 1-3-4.)
@ Deflection yoke
@ Prepare a work bench on the cushion
and place the CRT and beze! assembly
on the work bench.
Cushion
@® Four self tapping screws (M5)
Prepare a work bench that can protect surface
of CRT and can withstand the weight of the CRT.
@ Remove the CRT shield assembly
in the direction of the arrow @.
© Picture tube
in the direction of the arrow B.