Sony TRINITRON PVM-14L1 Service Manual page 15

* Remove the Q block assembly. (Refer to 1-6-2.)
* Remove the A board. (Refer to 1-6-3.)
* Remove the C board. (Refer to 1-6-4.)
@ Deflection yoke
@ Prepare a work bench on the cushion
and place the CRT and bezel assembly
on the work bench.
I
SS
alt
oe 7 ®&
Q
°
Cushion
@® Four self tapping screws (M5)
Bench
Note:
Prepare a work bench that can protect surface
of CRT and can withstand the weight of the CRT.
@ Remove the CRT shield assembly
in the direction of the arrow @).
© Picture tube
© Remove the bezel complete assembly
Cushion Z eae
in the direction of the arrow ©.