Seiko EMMY WATCH 7T32B Manual page 13

These axte holes are not used
for Cal. 7T32B and 7T42B
Second-counting wheel ~ @ Setting wheel for alarm
After disassembling the wheels and rotors, arrange them as indicated in the illustration below to facilitate
the reassembling procedures.
However, the rotors should be kept separately from each other, as they
emit magnetism.
[Reassembling procedures]
* Reassemble the parts below in the following order.
* The reassembling order shown below is different from the one in the exploded view on pages 3 and 4.
[1] 281 sso 4146 710
Setting wheel (Metal: silver)
Chronograph rotor for second
(Plastic: white)
261 580
885 591
|
Minute
wheel (Plastic: white}
Second
intermediate wheel for second-counting
[5] 281 582 (Plastic: green)
Setting wheel for alarm (Metal: silver}
885 590 ;
A
[4] 261 582
First intermediate wheel for second-counting
Minute wheel for alarm (Plastic: white) (Plastic: white)
[5] su 7 SS er ( P o s t e : v i t a )
Alarm rotor (Plastic: white) or (Flastic: whi
[6] 270 580 [15] 701 580
ÿ Center minute wheel for alarm (Metal: gold) WA and pinion (Plastic: green)
950 590 Small second wheel (Metal:
: gold)
Intermediate alarm wheel (Plastic: white) 231 580
4146 710 Third wheel and pinion (Metal: gold}
Chronograph rotor for minute (Plastic: white) 241 583
[2] 902 580 Fourth whee! and pinion (Metal: gold}
Minute-counting wheel (Metal: gold) 4283 581
950 590 Spacer for center wheel and pinion (Metal: silver)
Intermediate minute-counting whee! (Plastic: white) 888 580
Second-counting wheel (Metal: gold)
12