Advertisement
Model:
T-12
STANDARD FEATURES
DESIGN
• True's commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today's food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains 33°F to
38°F (.5°C to 3.3°C) for the best in food
preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger
fan blades give True reach-in's a more
effi cient low velocity, high volume
airfl ow design. This unique design
insures faster temperature recovery and
shorter run times in the busiest of food
service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows
for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front.
Anodized quality aluminum exterior
ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor
with coved corners.
PLAN VIEW
2
(67 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
T Series:
Reach-In Solid Door Refrigerator
• Insulation - entire cabinet structure and
solid door are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• Welded, heavy duty galvanized base rail
dipped in rust inhibiting enamel paint
for corrosion protection inside
and out.
• Base rail fi tted with leg levelers (legs not
available).
DOOR
• 300 series stainless steel exterior with
white aluminum liner to match cabinet
interior. Door extends full width of
cabinet shell.
• Lifetime guaranteed recessed door
handle. Door fi tted with 12" (305 mm)
long recessed handle that is foamed-
in-place with a sheet metal interlock to
insure permanent attachment.
• Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Three (3) adjustable, heavy duty PVC
coated wire shelves 20
(529 mm x 432 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker
switch mounted below door.
15
/
"
16
(24 mm)
1
60
/
"
8
(1528 mm)
63
(1602 mm)
5
/
ELEVATION
5
/
"
8
(8 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
13
/
"L x 17"D
16
1
/
" (13 mm) increments.
2
1
/
"
16
64"
(1626 mm)
"
16
Model
KCL
T-12
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 2
1
/
" (64mm) diameter castors.
2
❒ Additional shelves.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant), consult
factory technical service department for
BTU information.
13
24
/
"
16
(631 mm)
1
23
/
"
32
(585 mm)
15
46
(1193 mm)
23
7
/
"
16
(596 mm)
PLAN VIEW
Elevation
Right
Plan
TFEY10E
TFEY10S
TFEY10P
/
"
32
3D
TFEY103
Advertisement
