Managing Business Calls Using A Single Phone Number - Cisco 7965G Manual

Tips
• EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
• Changes that you make to your EM profile from your User Options web pages take effect
immediately if you are logged in to EM on the phone; otherwise, changes take effect the next time
you log in.
• Changes that you make to the phone from your User Options web pages take effect immediately
if you are logged out of EM; otherwise, changes take effect after you log out.
• Local settings controlled by the phone are not maintained in your EM profile.

Managing Business Calls Using a Single Phone Number

With Mobile Connect and Mobile Voice Access installed, you can use your mobile phone to handle
calls associated with your desktop phone number.
If you want to...
Configure Mobile Connect
Answer a call using your
mobile phone
Switch an in-progress call
between your desk phone
and mobile phone
Put a call that has been
picked up on your mobile
phone on hold
Connect to Mobile Voice
Access
Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.1(2)
Then...
Use the User Options web pages to set up remote destinations and
create access lists to allow or block calls from specific phone numbers
from being passed to the remote destinations. See
and Access Lists for Mobile Connect, page
See Answering a Call, page
See Switching an In-Progress Call to Another Phone, page
1. Press the Enterprise Hold (name may vary) softkey.
The other party is placed on hold.
2. On your mobile phone, press the Resume (name may vary) softkey.
See Switching an In-Progress Call to Another Phone, page
1. From any phone, dial your assigned Mobile Voice Access number.
2. Enter the number you are calling from, if prompted, and your PIN.
75.
24.
Setting Up Phones
28.
28.
51