Clevo P177SM-A Service Manual page 35

6. Carefully pry the bezel off the optical device at point
8
7. Separate the bezel and the optical device.
8
8. Reverse the process to attach the front bezel
9. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
screw holes should line up).
10. Replace the component bay cover and tighten the screws.
11. Restart the computer to allow it to automatically detect the new device.
d.
7
e.
8
)
(Figure 7d .
7
with the new optical device at point
8
f.
9
8
(Figure 7f).
9
Removal (cont'd.)
d. Pry the bezel off the opti-
e. Separate the bezel and
f. Install the front bezel.
8. Bezel Cover
• 1 Screw
Removing the Optical (CD/DVD) Device 2 - 11
Disassembly
Figure 7
Optical Device
cal device.
optical device
