Table of Contents
Advertisement
Preface
Related Documents
You may also need to consult the following manual for additional information:
User's Manual on Disc
This describes the notebook PC's features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and tighten the screws.
4. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not to exceed 130 degrees); use the other hand (as illustrated
in
Figure
the computer by the lid/LCD).
7. Press the power button to turn the computer "on".
VIII
1) to support the base of the computer (Note: Never lift
130º
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
Advertisement
Table of Contents
