Samsung WW80J7 Series User Manual page 48

Troubleshooting
Problem
9C1
9C2
HC
1C
AC
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
48 English
WW80J7260GW_03508C-01-EN.indd 48
Electronic Control Problem (Over Voltage Exception)
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check
• Clean the filter case or condenser.
• If the information code remains, contact a customer service
centre.
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
When the washer displays the "1C" code, the washer
do draining for 3 minutes. During this time, the Power button
is inoperative.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Action
2016/2/19 16:55:40