Table of Contents
Advertisement
Installation
STEP 3 Installing the anti-slip pad
STEP 4 Adjust the levelling feet
18 English
WW80J7260GW_03508C-01-EN.indd 18
1. Completely clean the bottoms of the
adjustable legs and wipe away any dust
and oil.
2. Mark the locations of the adjustable
front legs of the washing machine where
the anti-slip pads should be installed.
3. Attach the anti-slip pad by tilting or
moving the washing machine. When you
attach the pad, remove the plastic film
from the pad and attach the sticker side
of the pad to the floor so that the rough
side is facing upward. You should not
attach the sticker side of the pad to an
adjustable leg.
4. After installing the washing machine and
anti-slip pad, check if the adjustable legs
are level again.
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
2016/2/19 16:55:35
Advertisement
Table of Contents
