Samsung WW80J7 Series User Manual page 47

Problem
5C
dC
OC
LC / LC1
Ub
3C
WW80J7260GW_03508C-01-EN.indd 47
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending
on the connection type.
• Clean the debris filter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
Operating the dryer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
A problem has occurred in the water level sensor
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
When the washer displays the "LC/LC1" code, the washer
do draining for 3 minutes. During this time, the Power button
is inoperative.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message
will be shown in the display.
Motor problem
• Try restarting the cycle.
• If the problem continues, call for service.
Action
English 47
2016/2/19 16:55:40