Spread Spectrum - Biostar Hi-Fi A85X Bios Manual

Hi-Fi A85X UEFI BIOS Manual

Spread Spectrum

This item allows you to enable or disable spread spectrum for
CPU/ATIG/SRC clock..
Options: Disabled (Default) / Enabled
IGD Clock Control
This item allows user to adjust IGD clock
Options: Auto (Default) / Enabled
Note: The following items appear only when you set the IGD Clock Control item
to [Enabled]
IGD Clock
Allow BIOS to Select IGD clock, Range 300MHz-2000MHz
Memory Clock Mode
This item allows user to select the DRAM Frequency programming method. If
Auto, the DRAM speed will be based on SPDs. If Manual, the DRAM speed
specified will be programmed regardless of SPD. If AMP/XMP/XMP2, the
DRAM speed specified will be refer memory profile.
Options: Auto (Default) / Manual / AMP / XMP1 / XMP2
Note: The following items appear only when you set the Memory Clock Mode
item to [Manual]
Memory Frequency: DDR 800 / DDR3 1066 / DDR3 1333 / DDR3 1600 /
DDR3 1866 / DDR3 2133
26