Download Print this page

Baby Trend Nursery Center PY81958 Instruction Manual page 15

Advertisement

ASSEMBLY MONTAJE ASSEMBLEE
Center latch
Tube
Sujetador central
Varrou central
Tubo
Tube
Latch release
Mecanismo de liberación
Mécanisme de déblocage
TOP RAIL
BARANDILLA SUPERIOR
BARRIÈRE SUPÉRIEURE
Fig. 8a
Fig. 8b
Fig. 9
13
Copyright © 2011-2012, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
8)
• Locate the rail latch release in the center
and bottom side of each rail. Squeeze the
Tube
lever with two hands until the rail releases
the two tubes (Fig. 8a), then push down
Tubo
Tube
(Fig. 8b). NOTE: If the top rail(s) do not
release completely, DO NOT FORCE!
Lift the center of floor higher. Both tubes
must be released for the top rail to fold.
• Ubique el mecanismo de liberación del
sujetador de las barandillas en el centro
y la parte inferior de cada barandilla.
Presione la palanca con ambas manos
hasta que la barandilla suelte los dos tubos
(Fig. 8a), luego empuje hacia abajo (Fig.
8b). NOTA: Si las barandillas superiores
no se sueltan completamente, ¡NO LAS
FUERCE! Levante el centro del piso más
alto. Se deben soltar ambos tubos para
que la barandilla superior se pliegue.
• Localisez le mécanisme de déblocage du
verrou situé au centre et au bas de chaque
barrière. Comprimez le levier à deux mains
jusqu'à ce que la barrière libère les deux
tubes (Fig. 8a), puis poussez le mécanisme
vers le bas (Fig. 8b). REMARQUE : Si
une ou les deux barrières ne sont pas
complètement libérées, NE FORCEZ PAS!
Relevez le centre du plancher encore plus
haut. Pour plier la barrière supérieure,
les deux tubes doivent être libérés.
9)
• Gather four (4) corners and center all
together tightly (Fig. 9). Wrap Mattress
around Playard frame with padded side
facing inward. Secure the hooks and
loop straps by feeding them through the
loops on the end of the Mattress and
folding them back onto themselves.
• Wrap Mattress around Playard frame
with padded side facing inward.
• Junte las cuatro (4) esquinas y el centro
con firmeza (Fig. 9). Envuelva el colchón
alrededor de la estructura del corralito
de juegos con el lado acolchado hacia
adentro. Asegure las correas de enganche

Advertisement

loading