Note:
A predefined username that is set more than
the maximum allowed characters is an invalid
name.
Logging In as a User
1 Perform one of the following actions:
•
Press the preprogrammed User Login button.
•
or to User and press the Menu Select
button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
to [ID Entry] and press the Menu
•
or
Select button directly below Edit to enter ID. A
blinking cursor appears on the screen. Use the
keypad to type or edit a user name. Press the
Menu Select button directly below Ok to
submit.
•
or
to scroll through the list of predefined
user names. Press the Menu Select button
directly below Sel to select the predefined user
name.
•
Press and hold
or
list of predefined user names at a fast scroll
rate. Press the Menu Select button directly
below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary
Invalid ID.
3 Enter your Personal Identification Number (PIN)
number.
4 Press the Menu Select button directly below
Logn.
One of the following scenarios occurs:
•
In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and In
progress, with Cncl.
•
In ARS Non-Server Mode, the display shows
the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows
Offline, with Logt and Exit.
One of the following scenarios occurs:
to scroll through the
97
English